scem0
Mar 11, 01:20 AM
trying to think of how they could incorperate that into the next
;):D
;):D
bluap84
Feb 24, 06:51 AM
It could, but it doesn't have that much space. I would hook it up to an external raid array.
I would recommend a Drobo S. (http://www.drobo.com/products/drobo-s.php)
It is not cheep, but I have 9 gigs of drives in it, 6 available. Great product, keeps your data safe, it's fast, and easily expandable.
I see you got FCP in your sig, i use Premiere CS5 and Photoshop you suggest the drobo would be good stuff like that? I have checked out the drobo before, they do look good. I just need something i can remote into and control when im away kick off downloads etc...as the server will be headless (no monitor)
I would recommend a Drobo S. (http://www.drobo.com/products/drobo-s.php)
It is not cheep, but I have 9 gigs of drives in it, 6 available. Great product, keeps your data safe, it's fast, and easily expandable.
I see you got FCP in your sig, i use Premiere CS5 and Photoshop you suggest the drobo would be good stuff like that? I have checked out the drobo before, they do look good. I just need something i can remote into and control when im away kick off downloads etc...as the server will be headless (no monitor)
KyleGP
May 4, 02:06 AM
I agree.
I was going to send it to him today then it hit my gut and I thought logically.
So I went back and said change of plans, I want to do the exchange with my friend.
What's funny is since I told him that I'd like to do the exchange with my friend in person again, he hasn't responded. If he doesn't respond from this point on, I think I made the best decision of the century, because it was obviously a scam.
I was going to send it to him today then it hit my gut and I thought logically.
So I went back and said change of plans, I want to do the exchange with my friend.
What's funny is since I told him that I'd like to do the exchange with my friend in person again, he hasn't responded. If he doesn't respond from this point on, I think I made the best decision of the century, because it was obviously a scam.
tomandshell
Mar 8, 10:23 PM
I i
Phobophobia
Apr 8, 09:30 PM
Nintendo shipped the bulk to the US, since it's the single most important market when it comes to gaming
Interestingly, the DS has sold the most by far in Japan.
Interestingly, the DS has sold the most by far in Japan.
eawmp1
Apr 30, 03:26 AM
http://forums.macrumors.com/showthread.php?t=1042884
Yes, it's one dark pixel. Reported policy in above link.
Yes, it's one dark pixel. Reported policy in above link.
amols
Sep 29, 01:26 PM
http://www.apple.com/support/downloads/macosx1048updateintel.html
Yeah...and it shows 147MB for Intel in Sofftware Update..downloading it now from software update.
Yeah...and it shows 147MB for Intel in Sofftware Update..downloading it now from software update.
Lord Blackadder
Dec 14, 12:41 PM
Seems it may be a hoax (http://www.allfacebook.com/chipotles-facebook-page-consumed-by-cat-controversy-2010-12), perpetrated by parties unknown?
We at Chipotle respect all animals and would not joke about something like that
Presumably that respect does not extend to the animals they grind up for their big burritos. :D
We at Chipotle respect all animals and would not joke about something like that
Presumably that respect does not extend to the animals they grind up for their big burritos. :D
aethelbert
Oct 27, 07:41 PM
At our store, they were yelling to the people in the hallway at about 7:00, "anyone want a free t-shirt?" So there was no need to buy one and the people at the store didn't seem to care about it, either.
jav6454
Mar 31, 12:21 PM
Fox News looses viewers? I am not surprised...
>mon visage
>mon visage
wchong
Jun 10, 10:38 AM
could you explain why you posted this question in the macbook pro forum?
well many people thought that the first bridge was for iphone +SDK and the second bridge for mac hardware updates.
well many people thought that the first bridge was for iphone +SDK and the second bridge for mac hardware updates.
blevins321
Feb 23, 08:41 AM
Thanks all. Pic #1 is actually a sunrise. First one I'd seen in awhile :D. I think I'm just going to stick to this being a hobby. I use Aperture3 for my library, and I'll definitely play around with the post-processing features. Didn't use them for any of the posted photos. Thanks for all the advice!
macbook123
Feb 20, 09:53 AM
I posted this question in an older thread but realized that the topic was somewhat different.
Here is my problem.
I am in the process of migrating my iPhoto pictures over to Aperture. Because I have close to 100k pictures and short clips, I can not import my entire 500 GB library at once because I don't have enough hard drive space to support both iPhoto and Aperture libraries at the same time. I also thought it might make sense to not have one gigantic library. Also I would like to have my old photos separated by years, and I don't know if Aperture would do this if I imported the entire iPhoto library (which does only separate them by events) at once. So it appears to me that the only import method that would work (please correct me if this is wrong) would be to open the "Masters" directory of iPhoto in the Finder, and drag and drop each year's directory into the "Projects/Library" panel in Aperture. Note that I do not want any editing information preserved from iPhoto, so using the Masters seems to be the most space efficient thing. So far so good but there appear to be at least two big snags. Firstly the yellow projects folders within each blue years folder in Aperture are not in chronological but in alphabetical order and I can't find out how to fix this. Secondly (and much more importantly) the dates on many old photos have been altered in an apparent random manner during the import into Aperture! Therefore they do appear in the wrong locations in my events library, according to the altered date. There are many too many photos that have been changed to undo this manually (I estimate it would take several weeks to do this).
But how and why could this have happened in the first place?
I also noticed that even when I change the dates of the Aperture masters to the true ones (by comparing to the masters in iPhoto), they still remain in the same wrong location in my Projects/Events library, according to the date originally (and falsely) assigned by Aperture.
There surely has to be a way to import photos into Aperture without ruining their date stamp?
Thanks in advance for your help!
Here is my problem.
I am in the process of migrating my iPhoto pictures over to Aperture. Because I have close to 100k pictures and short clips, I can not import my entire 500 GB library at once because I don't have enough hard drive space to support both iPhoto and Aperture libraries at the same time. I also thought it might make sense to not have one gigantic library. Also I would like to have my old photos separated by years, and I don't know if Aperture would do this if I imported the entire iPhoto library (which does only separate them by events) at once. So it appears to me that the only import method that would work (please correct me if this is wrong) would be to open the "Masters" directory of iPhoto in the Finder, and drag and drop each year's directory into the "Projects/Library" panel in Aperture. Note that I do not want any editing information preserved from iPhoto, so using the Masters seems to be the most space efficient thing. So far so good but there appear to be at least two big snags. Firstly the yellow projects folders within each blue years folder in Aperture are not in chronological but in alphabetical order and I can't find out how to fix this. Secondly (and much more importantly) the dates on many old photos have been altered in an apparent random manner during the import into Aperture! Therefore they do appear in the wrong locations in my events library, according to the altered date. There are many too many photos that have been changed to undo this manually (I estimate it would take several weeks to do this).
But how and why could this have happened in the first place?
I also noticed that even when I change the dates of the Aperture masters to the true ones (by comparing to the masters in iPhoto), they still remain in the same wrong location in my Projects/Events library, according to the date originally (and falsely) assigned by Aperture.
There surely has to be a way to import photos into Aperture without ruining their date stamp?
Thanks in advance for your help!
rainbowboi
Oct 23, 08:52 AM
when do you guys think people will start lining up...I'm trying to figure out when I should (if i have to) leave school to get a t-shirt!
drew.bowser
Feb 18, 10:59 AM
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and not logic board to short, you probably can do away with it.
I will say that the OWC video is dead on. Follow it precisely. PAY ATTENTION TO THE SENSORS ON THE HDD. THEY BREAK VERY EASILY!!
I found that out the hard way. I have a new sensor on the way as we speak.
I second everything tek is saying. He's a smart guy :)
TEK - QUESTION - the glue...you can use standard rubber cement? It doesnt have to be a special kind of thermal glue or anything??
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and not logic board to short, you probably can do away with it.
I will say that the OWC video is dead on. Follow it precisely. PAY ATTENTION TO THE SENSORS ON THE HDD. THEY BREAK VERY EASILY!!
I found that out the hard way. I have a new sensor on the way as we speak.
I second everything tek is saying. He's a smart guy :)
TEK - QUESTION - the glue...you can use standard rubber cement? It doesnt have to be a special kind of thermal glue or anything??
SevenInchScrew
May 25, 09:33 PM
Okay, so on a side note, does anyone know if there is going to be another Elder scrolls game on 360 any time soon?
Back in Bethesda were predicting ES5 in late 2010. But, that was before Fallout 3 came out, and turned into a pretty big hit. My guess is the new ES game was put on hold while they worked on the DLC for FO3, and now Fallout: New Vegas, which comes out later this year. But, if I were to guess, I don't see why a new ES game couldn't be on their radar for next year. Nothing official, obviously, but it is a very big, very popular franchise, so a new game in the next couple years is pretty much a given.
http://www.joystiq.com/2009/08/18/bethesda-clarifies-mmo-claims-elder-scrolls-v-statements/
Back in Bethesda were predicting ES5 in late 2010. But, that was before Fallout 3 came out, and turned into a pretty big hit. My guess is the new ES game was put on hold while they worked on the DLC for FO3, and now Fallout: New Vegas, which comes out later this year. But, if I were to guess, I don't see why a new ES game couldn't be on their radar for next year. Nothing official, obviously, but it is a very big, very popular franchise, so a new game in the next couple years is pretty much a given.
http://www.joystiq.com/2009/08/18/bethesda-clarifies-mmo-claims-elder-scrolls-v-statements/
heyroth
Jun 21, 01:00 PM
Did anyone camp out in emeryville last year, and how was it?
MrFusion
Apr 24, 12:28 PM
byteSizeOfElement is wrong. Your code will only work (if all other bugs are fixed) with 64 bit code, not with 32 bit code.
Care to explain why? :confused:
Having little faith in the user (mainly me) to actually release the pointer, I already decided to get the value by passing a reference.
-(void) element:(void *) element
We#39;re wearing darker colors
Care to explain why? :confused:
Having little faith in the user (mainly me) to actually release the pointer, I already decided to get the value by passing a reference.
-(void) element:(void *) element
Crunch
May 5, 09:48 AM
Great! Now, how exactly would I do that? I'll have to find the official 4.3.2 IPSW file and then what? Do I use iTunes for it?
Ashapalan
Sep 14, 10:14 AM
a family friend has had hers done. But she spent over a grand on them.
So it sounds like a good deal based simply on the grand.
But, she doesnt drink wine or coffee anymore.
That to me would be quite a sacrifice!
So it sounds like a good deal based simply on the grand.
But, she doesnt drink wine or coffee anymore.
That to me would be quite a sacrifice!
iFiend
Apr 28, 03:46 PM
I know this might be a stupid question but i have been googling for hours now and i cannot find a solution.
Is there a way to unlock any other basebands off the iPhone 4 not only 1.59.00 that ultrasn0w does.? And if so can you please supply a list of the basebands that are unlockable with Verson 4.0iOS and up.?
The iOS version has nothing to do with unlocking, only the baseband matters. Now the only free way to unlock an iPhone 4 is with ultrasn0w and it must be baseband 1.59.00. You can however use a Gevey SIM or have a company do it for you. These will cost money.
Is there a way to unlock any other basebands off the iPhone 4 not only 1.59.00 that ultrasn0w does.? And if so can you please supply a list of the basebands that are unlockable with Verson 4.0iOS and up.?
The iOS version has nothing to do with unlocking, only the baseband matters. Now the only free way to unlock an iPhone 4 is with ultrasn0w and it must be baseband 1.59.00. You can however use a Gevey SIM or have a company do it for you. These will cost money.
gwuMACaddict
Sep 7, 09:32 AM
i shouldn't have said french, maybe french press. ullrich has always bothered me, i think the party boy image from a few years back really left a bad taste in my mouth.
phylumook
May 6, 06:52 PM
I'd recommend something like this combination
http://www.speckproducts.com/macbook-cases/macbook-pro-cases-15/seethru-satin-macbook-pro-case-15-black.html
+
http://www.goincase.com/products/detail/coated-canvas-sleeve-cl55246
or something similar
also I noticed in your signature you have a macbook pro for work... as well as home, isn't the point for any laptop/notebook portability lol :P
http://www.speckproducts.com/macbook-cases/macbook-pro-cases-15/seethru-satin-macbook-pro-case-15-black.html
+
http://www.goincase.com/products/detail/coated-canvas-sleeve-cl55246
or something similar
also I noticed in your signature you have a macbook pro for work... as well as home, isn't the point for any laptop/notebook portability lol :P
tnsmart
Apr 12, 05:00 PM
Thanks for the replies.
I have an ATT iphone and the Trim fits perfectly. I also run with my phone and it fits fine in my Belkin armband w/o removing the case. I also like that the case comes with a dock insert. So far it has been the perfect case for me
How well does the Trim protect your phone? If I dropped my iPhone on a parking lot from about 3 feet do you think it would be ok?
Also, could you tell me which Belkin armband you have?
I do like CapsuleRebel but think that it may be a bit too bulky, especially for putting into an armband.
Does anybody have any comments on the Vulcan?
Thanks.
I have an ATT iphone and the Trim fits perfectly. I also run with my phone and it fits fine in my Belkin armband w/o removing the case. I also like that the case comes with a dock insert. So far it has been the perfect case for me
How well does the Trim protect your phone? If I dropped my iPhone on a parking lot from about 3 feet do you think it would be ok?
Also, could you tell me which Belkin armband you have?
I do like CapsuleRebel but think that it may be a bit too bulky, especially for putting into an armband.
Does anybody have any comments on the Vulcan?
Thanks.